Constant Voltage & Current 12V Boost 9V 24V Adjustable Solar Charging LCD
Solar energy charging of adjustable automatic voltage rising and falling power
module with constant voltage and constant current LCD shell
The voltage and current can be adjusted by numerical control, which is
convenient, fast, industrial quality and high precision, and can be directly
used in engineering projects;
Professional power supply LCD is adopted, with clear interface, simple
operation and nearly perfect protection mechanism;
Hardware protection: anti reverse connection protection at the input end,
no burn in reverse connection; short circuit protection at the output end, no
burn in short connection; anti reverse filling at the output end, no additional
anti reverse filling diode when charging the battery;
Software protection: over voltage protection (OTP), over current
protection (OCP), over power protection (OPP), over temperature protection
OTP), input under voltage protection (LVP);
The default regulating voltage or constant current value can be set, which
can be adjusted quickly in various applications;
Voltage and current can be locked to prevent misoperation!
Full of materials, stable performance and wide use.
Input voltage: DC5.0V-30V (LVP with undervoltage protection when the input
voltage is lower than 4.7V, it is recommended to use it when the input voltage
is higher than 7V. When the input voltage is lower than 7V, the output power
will decrease. The lower the input voltage, the smaller the output power)
Output voltage: DC0.6V-30v
Output current: 0-4.0A
Output power: 35W under natural heat dissipation, 50W under air cooling
Voltage accuracy: ± 0.5% + 1 word, resolution: 0.01V, factory calibrated
Current accuracy: ± 0.8% + 3 words, resolution: 0.001A, factory calibrated
Conversion efficiency: about 88%
Soft start: Yes
Input reverse connection protection: Yes, reverse connection does not burn
Anti backflow at output: Yes, it can be connected to battery directly
Output short circuit protection: Yes, it can directly short the output terminal
Temperature protection (OTP): Yes, 100 ℃
Working frequency: 180KHZ
Press the UP/DOWN key briefly, and the voltage will be adjusted by default.
Long press (fast increase / decrease) is supported.
Long press the SET button for 1 second to adjust the constant current value
current limit value);
Set and CV flash when adjusting voltage and set and CC flash when adjusting
Press the SET key briefly to switch the display current A / power W / capacity
Ah / energy WH / time h;
Press the ON/OFF key briefly to turn ON/OFF the power output;
Long press the ON/OFF button for 2 seconds to switch the display input and
When CC is set, constant current value will be adjusted by default. When LED
is driven, fast dimming can be realized by pressing UP/DOWN key, which is very
Operation instructions of setting interface:
2.1. Press and hold the SET button for 3 seconds to enter the setting
2.2. Adjust the parameter size through UP/DOWN key, support long press (fast
increase / decrease), short press set key to switch the parameter to be
2.3. In the OAH / OPH / OHP interface, short press the "ON/OFF" button to
select the opening or closing of the corresponding function. If it is closed,
2.4. In the OAH / OPH parameter interface, long press the "ON/OFF" button to
select the capacity range (9.999Ah/99.99Ah/999.9ah/9999Ah,
2.5. After the parameter is set, press and hold the set button for 3 seconds
to exit the setting interface and save the setting parameters automatically;
Note: after product protection, the output will be turned off, and the LCD
will display the corresponding protection code (LVP / OVP / OCP / OPP / OAH /
OPH / OHP). The power chip itself also has various protections. If the chip
itself is protected, the OEP will be displayed.
This product has locking function:
Long press the set button for 5 seconds to lock the set voltage and current to
prevent misoperation! After locking, press and hold the set key for 5 seconds
4.1. It is used as a common voltage rising and falling power supply with
over-voltage / over-current / over power / over temperature / under voltage
1) set the voltage value.
2) set the constant current value (overcurrent protection value); (for
example, if the constant current value is 3.00A, the maximum current can only
reach 3A when you use the product, and when the current reaches 3A, the LCD
will display "CC" status, otherwise the LCD will display "CV" status)
4.2. Use as battery charger
Products without constant current function cannot be used to charge the
battery. Due to the large pressure difference between the consumed battery and
the charger, the charging current is too large and the battery is damaged.
Therefore, the battery should be charged with constant current at the
beginning. When the charging reaches a certain degree, the battery can be
automatically switched back to constant voltage charging.
1) determine the floating charge voltage and charging current of the battery
you need to charge; (if the parameter of lithium battery is 3.7v/2200mAh, the
floating charge voltage is 4.2V; if it is a 12V rechargeable battery, generally
set the floating charge voltage to about 14V)
2) under no-load condition, set the voltage value to make the output voltage
reach floating charge voltage; (if 3.7V lithium battery is charged, adjust the
output voltage to 4.2V).
3) under no-load condition, set constant current value (charging current of
4) connect the battery and charge.
4.3. Used as LED constant current driver
1) determine the working current and maximum working voltage of the led you
need to drive;
2) under no-load condition, set the voltage value and current value to make
the output voltage reach the maximum working voltage and current of LED;
3) connect led and test the machine.
This product can adjust the constant current value (between 0 - working
current) to realize the LED's stepless dimming and no stroboscopic!!
5.1 capacity / energy / operation time statistics:
Statistics will be started automatically after the power is turned on (ON),
and the value of the previous state will be displayed after the power is turned
off (OFF). After the power is turned on again (ON), recording will be started
automatically again; in the corresponding interface, long press the on / off
button for 3 seconds will automatically reset the corresponding data.
5.2 set maximum capacity / maximum energy / maximum operation time
5.2.1. Set the maximum capacity (OAH) / energy (OPH): when the OAH / OPH
function is started, when the statistical capacity / energy is higher than the
set maximum capacity / energy, the power automatically turns off the output and
flashes "OAH" / "OPH"; after the alarm is released, the capacity / energy
statistical data will be automatically cleared;
5.2.2. Set the maximum discharge time (OHP): when the OHP function is started,
when the power operation time is greater than the set maximum discharge time,
the power automatically turns off the output and flashes "OHP"; after the OHP
alarm is released, the time statistics will be automatically cleared;
This function can well realize the power supply of quantitative / timing.
Note: when the OAP / OPH and OHP functions are not turned on, the power supply
will automatically record the capacity / energy and operation time. When the
OAH / OPH and OHP functions are turned on, the power supply will automatically
turn off the output when the set value is reached; when the OHP function is
turned on, the operation time of the power supply is the countdown mode;
6.1. Input VIN- of module is prohibited to be short circuited with output
OUT-, otherwise constant current function will fail.
6.2. Please ensure that the power of the power supply is always greater than
the power required by the output load!
6.3. If the module wants to output at full load, the input voltage shall be
more than 8V. When the input voltage is 5V, the output power is about 15W; the
maximum module current value is 4a, provided that the maximum output power is
limited, such as output 18V, the current shall not be greater than 2A.
6.4. The module has the function of input undervoltage protection, which is
about 4.7V by default. When it is lower than this value, it will automatically
disconnect the output, and when the voltage is higher than 4.7V, it will
automatically recover the output (Note: 4.7V is the voltage at the product
port, when the input current is relatively large, do not ignore the partial
voltage on the input wire).
Package Included: 1X Buck-boost Constant Voltage Current 12V 9V 24V Adjustable
Solar Charging Module
About FeedbackShipping Policy 1. We Ship to Worldwide
2. We ship your orders within 1-2 business days after the payment cleared.
3. Item shipped from China via china Post Airmail, reach most of the
countries within 2 to 4 weeks.
4. Delivery time depends on destination and other factors, it may takes up to
20 days. If you don't receive
the item after 25 days,please keep in touch with us, we'll investigate and
solve the delivery problem.
5. Import duties, taxes, and charges are not included in the item price or
shipping cost. These charges
are the buyer's responsibility. Please check with your country's customs
office to determine what these
additional costs will be prior to bidding or buying. Item LocationShenZhen
1. We accept PAYPAL only.
2. Payment must be made within 7 days of auction closing (Unpaid dispute will
automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY
OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration,
etc.) in the EBAY NOTES SECTION
when you make payment
1. Customer satisfaction is our top goal. All products are quality checked.
They are new and in good
condition when shipped to our customers. If product is defective or damage
upon arrival, or wrong
product shipped, please keep in touch with us immediately. Returns accepted
within 14 days of delivery date
and item must be in original new condition, not worn or altered in any way
with attached tags & wrap.
Otherwise deal is final. Return shipping must be paid by buyer.
2. Please keep in touch with us first if you have
anyproblems/questions/concerns. We will be happy to resolve
any issues you may have in a cordial and friendly manner.
3. We appreciate your Positive Feedback, and will do the same in return.
PLEASE DO NOT leave
negative feedback without first communication with us. Please allow max 24
HOURS for us to respondAbout Feedback
We maintain high standards of excellence and strive for 100% customer
satisfaction! Feedback is
very important to us. We request that you keep in touch with us immediately
BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your concerns.It is
impossible to address
issues if we do not know about them!